Liftmaster Commercial Garage Door Openers

Need a LiftMaster commercial garage door opener? We’re an authorized dealer right here in Lethbridge, Alberta. Reach out to us

  • Lethbridge, Alberta

Authorized Dealer

Liftmaster Commercial Garage Door Openers

LiftMaster commercial garage door openers are built to last and packed with smart features. They run quiet, keep your home secure, and work with most smart home systems. With myQ® connectivity, battery backup, and strong lifting power, they’ve got everything you need. Want to learn more? Just give us a shout!

Liftmaster Garage Door Openers - Lethbridge, Alberta
Liftmaster Residential Garage Door Openers - Lethbridge, Alberta

Get a Quote now!

Commercial Garage Door Opener Models

Liftmaster - LJ8900W Model

Liftmaster LJ8900W Model - Residential Garage Door Openers - Lethbridge, Alberta
  • Type: Jackshaft
  • Light duty: less 10 cycles / hour
  • Power: DC motor
  • Single‑Phase: 115V
  • Power: DC motor
 

MORE DETAILS

The Model LJ8900W is a jackshaft door opener, as manufactured by The Chamberlain Group, Inc. and is for use on light-duty commercial standard, vertical and high lift sectional doors with torsion assemblies. It is rated up to 10 cycles per hour during peak periods. It features a compact design ideal for limited height, cathedral, or obstructed ceiling installations.

  • Jackshaft door operator
  • Motor: Heavy-duty 12 Volts DC
  • Single phase: 115 V
  • Wall-mount installation: mounts on the left or right side of door. No rails to hang, the operator simply mounts on the wall and attaches to the door torsion bar. Unit requires an electrical outlet within 6 ft (1.83 m)
  • Drive Mechanism: Internal Chain and Sprocket
  • Quick-ConnectTM terminals for faster wire installation
  • Patented absolute positioning technology: The newest technology in commercial door openers. This patented design allows the electronic limits to be extremely accurate, even after a power failure.
  • Maximum door weight: 850 lb (385 kg)
  • Minimum side room required: 14 in (36 cm)
  • UL and CSA listed.
  • Requirements: for doors up to 14 ft (4.3 m) high, 18 ft (5.5 m) wide or 180 ft2 (16.6 m2) maximum
  • 2-year motor warranty.
 
 
  • LiftMaster LJ8900W door opener
    Single button control station (02101)
  • Cable tension monitor (041A6104)
  • Safety reversing sensor kit (The Protector system®) (041-0136)
  • Also included: a hardware bag for installation (includes all necessary hardware for installation)

Liftmaster - DDO8900W Model

Liftmaster DDO8900W Model - Residential Garage Door Openers - Lethbridge, Alberta
  • Type: Jackshaft
  • Light duty: 10 cycles / hour maximum
  • Power: DC motor
  • Fast open at 12″ / second
  • Single‑Phase: 115V
 

MORE DETAILS

The LiftMaster® Model DDO8900W is a jackshaft door opener ideal for commercial facilities as warehouses and distribution centres with smaller sectional doors with full vertical lift. It is rated for a light use of a maximum of 10 cycles/hour, fewer than 25 cycles/day. Includes a one year free subscription to myQ® Business™.

  • Jackshaft door operator
  • Motor: Heavy-duty 12 Volts DC
  • Single phase: 115 V AC, 60Hz
  • Wall-mount installation: mounts on the left or right side of door. No rails to hang, the operator attaches to the door torsion bar. Unit requires an electrical outlet within 6 ft (1.83 m)
  • Drive Mechanism: Internal Chain and Sprocket
  • Timer‑to‑close can be programmed to close door after 1, 5 or 10 minutes
  • Smooth start/stop reduces wear of the door system for lasting performance
  • Door lock capability lets you add up to 2 door locks to your system for added security
  • Battery backup adding capability that ensures access even when the power is out
  • Built‑in Wi‑Fi® for simple operator Internet connection
  • Maximum door weight: 300 lb (136 kg)
  • Door area: for doors up to 14 feet (4.3 m) high, 16 feet (4.9 m) wide or 180 feet2 (16.6 m2) maximumFast open: approximately 12 inches per second (305 mm)
  • UL® listed
  • 2‑year motor warranty.
 
 
  • LiftMaster DDO8900W electric garage door opener
    3‑button NEMA 1 station (02103)
  • Cable tension monitor (041A6104)
  • Safety reversing sensor kit (The Protector system®) (041-0136)

Liftmaster -MH Model

Liftmaster MH Model - Residential Garage Door Openers - Lethbridge, Alberta
  •  Type: Jackshaft
  • Medium duty: less 12 cycles / hour
  • Power: ½ HP
  • With chain hoist
  • Single-Phase: 115V

MORE DETAILS

The MH model is a medium‑duty hoist operator, as manufactured by The Chamberlain Group. and is for use on vertical or high lift sectional doors or small rolling doors and grilles. It is rated for 12 cycles per hour during peak periods up to 50 cycles / day.

  • Drive system: chain hoist
  • Single phase: 115 V
  • Horsepower: ½ HP
  • Minimum side room required: 18 in (457 mm)
  • Solid‑state Medium‑duty logic circuit board.
  • High‑starting torque operator with instant reverse.
  • Capacitor start on single‑phase
  • NEMA 1 type electrical box, heavy‑duty 11‑gauge steel frame with baked‑on powder coat finish, all reduction sprockets drilled and pinned to shafts.
  • Motor is removable without affecting limit switch settings.
  • Heavy‑duty solenoid brake
  • First‑stage heavy‑duty 4L V‑Belt; second and third stages #48 chain
  • Heavy‑duty oil‑filled bushings.
  • Adjustable friction clutch helps protect against damage to the door and opener should the door meet an obstruction
  • Provides emergency manual operation using an electrically interlocked floor level disconnect and chain hoist mechanism.
  • Motor overload protection.
  • Integrated timer‑to‑close (TTC) allows programming from 5 to 60 seconds in 5‑second increments. Allows for timed automatic door closure after the door reaches the full open position (Requires monitored safety devices, with CPS‑U, CPS‑UN4, or CPS‑EI)
  • Integrated 90‑second maximum run timer
  • UL and CSA listed.
  • 2‑year warranty.
  • NOT compatible with myQ
 
 
  • MH door operator Including a chain hoist
  • 3‑button NEMA 1 station (02103)
  • Photoelectric sensors (CPS-U)
  • Chain spreader (4000000714)
  • Remote(s) optional
  • Also included: hardware for installation

Liftmaster - MT Model

Liftmaster MT Model - Residential Garage Door Openers - Lethbridge, Alberta
  • Type: Jackshaft
  • Medium duty: less 12 cycles / hour
  • Power: ½ HP
  • With chain hoist
  • Single-Phase: 115V

MORE DETAILS

The MT Model is a medium-duty Logic trolley door opener, as manufactured by Chamberlain group. and is for use on standard lift sectional doors. It is rated for 12 cycles per hour during peak periods. Up to 50 cycles / day.

  • Trolley type door opener
  • Single phase: 115 V
  • Horsepower: ½ HP
  • Additional headroom required: 4 in (102 mm)
  • Required depth: door height + 48 in (1219 mm)
  • UL325‑2010 compliant medium‑duty logic programmable integrated circuit board
  • Built‑in 3‑channel, 315 MHz radio receiver accepts up to 20 Chamberlain® Security+® or unlimited DIP switch remotes. 3‑button remotes can be programmed for open/close/stop operation.
  • Integrated Timer‑to‑Close (TTC) allows programming from 5 to 60 seconds in 5‑second increments. Allows for timed automatic door closure after the door reaches the full open position (Requires monitored safety devices, with CPS‑U, CPS‑UN4, or CPS‑EI).
  • Integrated 90‑second maximum run timer
  • UL325‑2010 monitored entrapment capability
  • Monitored protection against transient overvoltage conditions
  • 3‑button control station included
  • High‑starting torque operator with instant reverse.
  • Solid‑state medium‑duty Logic circuit board.
  • Capacitor start on single‑phase.
  • Motor is removable without affecting limit switch settings.
  • Spring‑loaded disconnect for emergency manual operation.
  • First‑stage heavy‑duty 4L V‑Belt; second and third stages #48 chain.
  • Heavy‑duty oil‑filled bushings.
  • Adjustable friction clutch helps protect against damage to the door and opener should the door meet an obstruction.
  • Floor level disconnect provides emergency manual operation.
  • Motor overload protection.
  • NEMA 1 type electrical box, heavy‑duty 11‑gauge steel frame with baked‑on powder coat finish, all reduction sprockets drilled and pinned to shafts.
  • High strength dual L‑rail track with exclusive nylon quiet gliding chain guides on rail spacers for quiet, smooth operation. Includes quick‑mount header bracket which provides fast, swing‑up installation.
  • UL and CSA listed.
  • 2‑year warranty.
  • NOT compatible with myQ.
  • MT door operator
    3‑button NEMA 1 station (02103)
  • Photoelectric sensors (CPS-U)
  • Also included:
  • Rail and chain according to door height
  • Hardware for installation
  • Remote(s) optional

Liftmaster -JHDC Model

Liftmaster HDC Model - Residential Garage Door Openers - Lethbridge, Alberta
  • Type: Jackshaft
  • Start/stop progressive
  • MyQ technology and WIFI
  • Wall Mount Installation
  • Battery back-up available
  • Power: available in 1/2, 3/4, 1 and 1.5 HP
  • With chain hoist
  • Single-Phase: 120V and 240V,
    Triphase: 208V, 480V, 600
 

MORE DETAILS

This all-new MAXUM commercial door operator is a state-of-the-art platform that introduces next-level versatility in a sleek, purpose-built design that’s easier to install and service. With unrivaled performance and intelligence, the new line-up will help today’s commercial facilities take the next step toward a smarter future.

  • Drive system: Jackshaft
  • Available in ½ HP, ¾ HP, 1 HP, 1.5 HP (24VDC, DC Motor)
  • Voltage/phase: 120Vac 1 PH/240Vac 1/3PH; 480Vac 3PH; 208Vac 3PH (via tra120Vac 1 PH/240Vac 1/3PH; 480Vac 3PH; 208Vac 3PH (via transformer); 600Vac 3PH (via transformer)
  • Timer‑to‑Close conveniently and confidently closes the door automatically after a predetemined amount of time has elapsed
  • Battery Backup Capable. Provides seamless operation by providing standby power when the power is down.
  • Mechanical braking system that adds substantial door position control and prevents the door from being back driven. Brake is included on 2200 models.
  • Diagnostic and programmation on small form LCD display
  • MyQ technology and WIFI allows you to securely control and monitor your gate operator from anywhere using your smartphone
  • 3 Monitored Entrapment Protection Inputs, protect up to 3 entrapment protection points with every installation
  • Manual disconnect when unlocked allows gate to be operated manually, with the hoist chain
  • Auxiliary Relay Board (AUXREL), easy to install accessory board for auxiliary limit switches, lights, bells, horns, strobes, and other devices.
  • Optional heater, added when quoted, operating temperature without heater -4°F (-20°C) – 140°F (60°C), with heater (HTR) -40°F (-40°C) – 140°F (60°C)
  • Compliant with ANSI/CAN/UL325 standards
  • Speed: Average of 12 inches (304 mm) per second.
  • Warranty: 2 Years
  • LiftMaster JHDC door opener
  • Wall control (DCWALLCTL)
  • Monitored Through-Beam Photo Eye (CPS-U)
  • Chain Spreader
  • Sprocket sold separetly.
  • Also included: All necessary hardware for installation, antenna, 25 ft. of hoist chain (additional chain can be purchased separately)

 

Liftmaster - TDC Model

Liftmaster TDC Model - Residential Garage Door Openers - Lethbridge, Alberta
  • Type: Trolley Drive
  • Start/stop progressive
  • Ceiling Mount Installation
  • Battery back-up available
  • Power: available in 1/2, 3/4, 1 and 1.5 HP
  • MyQ technology and WIFI
  • Single-Phase: 120V and 240V, Triphase: 208V, 480V, 600V

MORE DETAILS

This all-new MAXUM commercial door operator is a state-of-the-art platform that introduces next-level versatility in a sleek, purpose-built design that’s easier to install and service. With unrivaled performance and intelligence, the new line-up will help today’s commercial facilities take the next step toward a smarter future.

  • Drive system: Chain drive operator
  • Available in ½ HP, ¾ HP, 1 HP, 1.5 HP (24VDC, DC Motor)
  • Voltage/phase: 120Vac 1 PH/240Vac 1/3PH; 480Vac 3PH; 208Vac 3PH (via tra120Vac 1 PH/240Vac 1/3PH; 480Vac 3PH; 208Vac 3PH (via transformer); 600Vac 3PH (via transformer)
  • Timer‑to‑Close conveniently and confidently closes the door automatically after a predetemined amount of time has elapsed
  • Battery Backup Capable. Provides seamless operation by providing standby power when the power is down.
  • Mechanical braking system that adds substantial door position control and prevents the door from being back driven. Brake is included on 2200 models.
  • Diagnostic and programmation on small form LCD display
  • MyQ technology and WIFI allows you to securely control and monitor your gate operator from anywhere using your smartphone
  • 3 Monitored Entrapment Protection Inputs, protect up to 3 entrapment protection points with every installation
  • Manual disconnect when unlocked allows gate to be operated manually
  • Auxiliary Relay Board (AUXREL), easy to install accessory board for auxiliary limit switches, lights, bells, horns, strobes, and other devices.
  • Optional heater, added when quoted, operating temperature without heater -4°F (-20°C) – 140°F (60°C), with heater (HTR) -40°F (-40°C) – 140°F (60°C)
  • Compliant with ANSI/CAN/UL325 standards
  • Speed: Average of 12 inches (304 mm) per second.
  • Warranty: 2 Years
  • LiftMaster TDC door opener
  • Wall control (DCWALLCTL)
  • Monitored Through-Beam Photo Eye (CPS-U)
  • Also included: All necessary hardware for installation, antenna.

Liftmaster - JDC Model

Liftmaster RJDC Model - Residential Garage Door Openers - Lethbridge, Alberta
  • Type: Jackshaft
  • Start/stop progressive
  • MyQ technology and WIFI
  • Wall Mount Installation
  • Battery back-up included
  • Power: available in 1/2 HP
  • Without chain hoist
  • Single-Phase: 120V and 240V
Triphase: 208V, 480V, 600V

MORE DETAILS

This all-new MAXUM commercial door operator is a state‑of‑the‑art platform that introduces next-level versatility in a sleek, purpose‑built design that’s easier to install and service. With unrivaled performance and intelligence, the new line‑up will help today’s commercial facilities take the next step toward a smarter future.

  • Drive system: Jackshaft
  • Available in ½ HP (24VDC, DC Motor)
  • Voltage/phase: 120Vac 1 PH/240Vac 1/3PH; 480Vac 3PH; 208Vac 3PH (via tra120Vac 1 PH/240Vac 1/3PH; 480Vac 3PH; 208Vac 3PH (via transformer); 600Vac 3PH (via transformer)
  • Timer‑to‑Close conveniently and confidently closes the door automatically after a predetemined amount of time has elapsed
  • Battery Backup, 2 batteries of 4.5A, provides seamless operation by providing standby power when the power is down
  • Mechanical braking system that adds substantial door position control and prevents the door from being back driven
  • Diagnostic and programmation on small form LCD display
  • MyQ technology and WIFI allows you to securely control and monitor your gate operator from anywhere using your smartphone
  • 3 Monitored Entrapment Protection Inputs, protect up to 3 entrapment protection points with every installation
  • Manual disconnect when unlocked allows gate to be operated manually
  • Auxiliary Relay Board (AUXREL), easy to install accessory board for auxiliary limit switches, lights, bells, horns, strobes, and other devices.
  • Optional heater, added when quoted, operating temperature without heater -4°F (-20°C) – 140°F (60°C), with heater (HTR) -40°F (-40°C) – 140°F (60°C)
  • Compliant with ANSI/CAN/UL325 standards
  • Speed: Average of 12 inches (304 mm) per second.
  • Warranty: 2 Years
  • LiftMaster JDC door opener
  • Wall control (DCWALLCTL)
  • Monitored Through-Beam Photo Eye (CPS-U)
  • Backup Battery
    Chain Spreader
  • Sprocket sold separetly.
  • Also included: All necessary hardware for installation, antenna

Liftmaster - RJDC Model

Liftmaster RJDC Model - Residential Garage Door Openers - Lethbridge, Alberta
  • Type: Jackshaft
  • Brake: Electro-Mechanical braking system
  • Power: DC motor
  • Fast open at 12″ / second Single‑Phase: 120V

MORE DETAILS

This all-new MAXUM commercial door operator is a state-of-the-art platform that introduces next-level versatility in a sleek, purpose-built design that’s easier to install and service. With unrivaled performance and intelligence, the new line-up will help today’s commercial facilities take the next step toward a smarter future.

  • Drive system: Jackshaft with manuel disconnect, installation of left or right available.
  • Available in ½ HP (24VDC, DC Motor)
  • Voltage/phase: 120Vac 1 PH/240Vac ⅓PH; 480Vac 3PH; 208Vac 3PH (via tra120Vac 1 PH/240Vac ⅓PH; 480Vac 3PH; 208Vac 3PH (via transformer); 600Vac 3PH (via transformer).
  • Timer‑to‑Close conveniently and confidently closes the door automatically after a predetemined amount of time has elapsed.
  • Battery Backup Capable. Provides seamless operation by providing standby power when the power is down.
  • Electro-Mechanical braking system that adds substantial door position control and prevents the door from being back driven.
  • Diagnostic and programmation on small form LCD display
  • MyQ technology and WIFI allows you to securely control and monitor your gate operator from anywhere using your smartphone.
  • 3 Monitored Entrapment Protection Inputs, protect up to 3 entrapment protection points with every installation
  • Manual disconnect when unlocked allows gate to be operated manually.
  • Auxiliary Relay Board (AUXREL), easy to install accessory board for auxiliary limit switches, lights, bells, horns, strobes, and other devices.
  • Optional heater, added when quoted, operating temperature without heater -4°F (-20°C) – 140°F (60°C), with heater (HTR) -40°F (-40°C) – 140°F (60°C)
  • Compliant with ANSI/CAN/UL325 standards
  • Speed: Average of 12 inches (304 mm) per second.
  • Warranty: 2 Years
  • LiftMaster RJDC door opener
  • Wall control (DCWALLCTL)
  • Monitored Through-Beam Photo Eye (CPS-U)
  • Chain Spreader
  • Sprocket sold separetly
  • Also included: a hardware bag for installation (includes all necessary hardware for installation)

Liftmaster -H Model

Liftmaster H Model - Residential Garage Door Openers - Lethbridge, Alberta
  • Type: Jackshaft
  • Industrial duty: more than 12 cycles/hour, max 80/day
  • Power: available in ½, ¾, and 1 HP
  • With chain hoist
  • Single-Phase: 115V and 230V,
3-Phase: 208V, 230V and 460V, 575V

MORE DETAILS

The H model is an industrial-duty hoist door opener, as manufactured by The Chamberlain Group and is for use on vertical or high lift sectional doors, rolling doors and grilles. It is rated for 25 cycles per hour during peak periods. Up to 80-90 cycles / day.

  • ackshaft‑style operator
  • Voltage/phase:
    • Single-Phase: 115& and 230V
    • Three-Phase: 208/230/460V or 575V
  • Available in ½, ¾ and 1 HP
  • Floor‑level disconnect and chain hoist with electrical interlock for hoist operation in an emergency
  • Timer‑to‑Close conveniently and confidently closes the commercial door automatically after a predetemined amount of time has elapsed
  • Mid‑stop enables partial opening of doors to a preprogrammed position for enery savings, time savings and convenience
  • Continuous‑duty high‑starting torque motor with instant reverse and overload protection. Capacitor start with single phase, removable without affecting limit switches
  • Adjustable friction clutch helps to protect door and operator from damage should the door meet an obstruction
  • Maximum run timer reverses or stops door if closing time exceeds expected time frame to limit damage to door and operator
  • Delay‑on‑reverse circuit prevents abrupt reversal of door, reducing wear on the door and operator system
  • 3‑button control station for OPEN/CLOSE/STOP functions with Maintenance Alert System (MAS)
  • Drive reduction with first stage heavy‑duty 5L V‑belt; second, third and fourth stages #48 chain; #50 output sprocket chain
  • Industrial ball bearings on 1″ output shaft; heavy‑duty oil‑filled bushings on reduction shafts
  • Factory installed heavy‑duty electrical brake (On ¾ HP and 1 HP, optional on ½ HP)
  • Construction: NEMA 1 rated electrical box
  • Door speed: 8‑9 inches (203‑229 mm) per second
  • Compliant with UL 325 standards
  • Warranty: 2 Years
  • H door operator Including a chain hoist
  • 3-button NEMA 1 station with MAS (02103L) (Maintenance Alert System)
  • Photoelectric sensors (CPS-U)
  • Chain spreader (4000000714)
  • Remote(s) optional
  • Also included: a bag including all necessary hardware for installation

Liftmaster - RBH Model

Liftmaster TDC Model - Residential Garage Door Openers - Lethbridge, Alberta
  • Type: Jackshaft
  • Industrial duty: more than 12 cycles/hour, max 80/day
  • Heavy‑duty roller bearings
  • Power: available in ½, ¾, and 1 HP
  • With chain hoist
  • Place mounted: On wall
  • Factory installed brake
  • Single-Phase: 115/230V, 3-Phase: 208/230/460V or 575V

MORE DETAILS

The LiftMaster® model RBH is a jackshaft‑type operator used in commercial and industrial applications. Optimal for use with larger sectional doors with vertical or high lift or with rolling doors and grilles. It also includes a chain hoist with electric interlock for manual operation in an emergency. Made for intensive work, its rated duty cycle is maximum 25 cycles per hour and less than 90 cycles per day.

  • Jackshaft‑style operator
  • Voltage/phase:
    • Single‑Phase: 115/230V
    • Three-Phase: 208/230/460V or 575V
  • Available in ½, ¾ and 1 HP
  • Floor‑level disconnect and chain hoist with electrical interlock for hoist operation in an emergency
  • Timer‑to‑Close conveniently and confidently closes the commercial door automatically after a predetemined amount of time has elapsed
  • Mid‑stop enables partial opening of doors to a preprogrammed position for enery savings, time savings and convenience
  • Continuous‑duty high‑starting torque motor with instant reverse and overload protection. Capacitor start with single phase, removable without affecting limit switches
  • Adjustable friction clutch helps to protect door and operator from damage should the door meet an obstruction
  • Maximum run timer reverses or stops door if closing time exceeds expected time frame to limit damage to door and operator
  • Delay‑on‑reverse circuit prevents abrupt reversal of door, reducing wear on the door and operator system
  • 3-button control station for OPEN/CLOSE/STOP functions with Maintenance Alert System (MAS)
  • Drive reduction with first stage heavy‑duty 5L V‑belt; second, third and fourth stages #48 chain; #50 output sprocket chain
  • Industrial ball bearings on 1 inch output shaft; heavy-duty oil‑filled bushings on reduction shafts
  • Factory installed heavy-duty electrical brake
  • Roller bearing modification helps to extend the life of the drive system. Consists of heavy‑duty roller bearings on all shafts
  • Construction: NEMA 1 rated electrical box
  • Door speed: 8‑9 inches (203‑229 mm) per second
  • Compliant with UL 325 standards
  • Warranty: 2 Years
  • RBH door operator
  • Including a chain hoist
  • 3‑button NEMA 1 station with MAS (02103L) (Maintenance Alert System)
  • Photoelectric sensors (CPS‑U)
  • Chain spreader (4000000714)
  • Remote(s) optional
  • Also included: a bag including all necessary hardware for installation

Liftmaster - ATSW Model

Liftmaster ATSW Model - Residential Garage Door Openers - Lethbridge, Alberta
  • Type: Trolley
  • Light duty: less 8 cycles / hour
  • Wi‑Fi Built-in
  • Power: ¾ HP
  • Emergency manual operation using accessible disconnectSingle‑Phase: 115V

MORE DETAILS

The model ATSW (Avanced Trolley System Wi‑Fi) is designed for commercial doors with light‑duty cycle requirements. It is the perfect electric door opener for use on standard lift or low head room sectional doors up top 14′ high, rated for 8 cycles per hour. The ATS meets all current federal and state laws and UL325 safety standards for residential and commercial applications.

  • Drive system: chain
  • Single phase: 115 V
  • Horsepower: ¾ HP
  • Motor overload protection
  • Electronic controls to make setup easy
  • Safety reverse / automatic door stop
  • Steel “I”-Beam trolley track for increase rigidity
  • Additional headroom required: 2 ½ po (51 mm)
  • Total length installed:
    • 8 ft rails = 140 in
    • 10 ft rails = 164 in
    • 12 ft rails = 189 in
    • 14 ft rails = 213 in
  • UL‑325 and CSA listed.
  • 1‑year warranty
  • Liftmaster ATSW electric garage door openers commercial
  • Single Wall Button (883LMW)
  • Protector System (41A4373ATS)
  • Steel I-Beam Trolley according to door height
  • Appropriate 1 piece rail chain
  • Hardware bag for installation (includes all necessary hardware for the installation)

Liftmaster - T Model

Liftmaster T Model - Residential Garage Door Openers - Lethbridge, Alberta
  • Type: Trolley
  • Industrial duty: less 12 cycles / hour
  • Power: available in 1⁄3, ½, ¾ and 1 HP
  • Emergency manual operation using accessible disconnect
  • Single-Phase: 115V and 230V,
    3-Phase: 208V, 230V and 460V, 575V.
 

MORE DETAILS

The T model is an industrial-duty trolley door opener, as manufactured by The Chamberlain Group and is for use on standard lift sectional doors. It is rated for more than 12 cycles per hour during peak periods.

  • Trolley type door opener
  • Voltage/phase:
    • Single-Phase: 115 V and 230 V
    • 3-Phase: 208 V, 230 V and 460 V, 575 V
  • Additional headroom required: 4 in (102 mm)
  • Required depth: door height + 48 in (1219 mm)
  • Class 2 circuit with 40 VA transformer
  • Built‑in 3‑channel, 315 MHz radio receiver accepts up to 23 Security+® or unlimited DIP switch remotes. 3‑button remotes can be programmed for open/close/stop operation
  • Maintenance Alert SystemTM establishes a routine maintenance schedule based on the number of cycles or calendar date. Includes self‑diagnostic system that allows you to troubleshoot up to eight different error codes
  • Timer‑to‑close allows programming in 1‑sec or 15‑sec increments and permits timed automatic door closure after the door reaches the fully open position; requires monitored photosensors, either CPS‑U, CPS‑UN4, or a 4‑wire edge, using the CPS‑EI edge interface
  • Thermal motor overload can be easily reset from the 3‑button floor level control station
  • Continuous‑duty high‑starting torque motor with instant reverse.
  • Motor overload protection.
  • Quick‑mount header bracket which provides fast, swing‑up installation.
  • Single‑or three‑phase, capacitor start on single‑phase.
  • Switchless motor eliminates stuck start switch and motor malfunctions on single-phase door openers.
  • Spring‑loaded disconnect for emergency manual operation.
  • Motor is removable without affecting limit switch settings.
  • Wiring type: All operators are factory preset to C2 wiring, providing momentary contact to open and stop, with constant contact to close. Monitored entrapment protection, using approved photo sensors CPS‑U are standard. All other wiring types, B2, T, TS and FSTS, can be selected with the selection of a switch. LiftMaster CPS‑UN4 and CPS‑RPEN4 photosensors or a monitored 4‑wire sensing edge (via a CPS‑EI Edge Interface card) are optional. Logic 4.0 door openers can only accept UL‑approved LiftMaster CPS‑U, CPS‑UN4, CPS‑RPEN4 or CPS‑EI monitored entrapment protection devices.
  • First‑stage heavy‑duty 5L V‑belt; second #41 chain; output on trolley #48 chain on 1⁄3 and ½ HP; #41 chain on ¾ and 1 HP.
  • Solenoid‑actuated brake is standard on ¾ and 1 HP units to prevent coasting of door.
  • Solenoid‑actuated brake is standard on 3/4 and 1 HP units to prevent coasting of door.
  • Ball bearings on output shaft; heavy‑duty, oil‑filled bushings on reduction shafts.
  • Adjustable friction clutch helps protect against major damage to door and operator should the door meet an obstruction.
  • NEMA 1 type electrical box, heavy‑duty 11‑gauge steel frame with durable powder coat finish, all reduction sprockets drilled and pinned to shafts.
  • High‑strength dual L‑rail track with nylon quiet‑gliding chain guides on rail spacers for quiet, smooth operation.
  • 1.5-second delay‑on‑reverse circuit to prevent premature door and operator wear.
  • The timer‑to‑close automatically closes the door – programmable in 1‑second or 15‑second increments.
  • The mid‑stop stops the door at programmable mid‑stop during open travel.
  • The maximum run timer signals the door to reverse or stop if closing time exceeds maximum by more than 10 seconds.
  • Maintenance alert system (5 000 to 10 000 cycles).
  • UL and CSA listed.
  • 2‑year warranty.
  • T door operator
    3-button NEMA 1 station with MAS (02103L) (Maintenance Alert System)
  • Photoelectric sensors (CPS-U)
  • Also included:
  • Rail and chain according to door height
  • Hardware for installation
    Remote(s) optional

Liftmaster - GH Model

Liftmaster GH Model - Residential Garage Door Openers - Lethbridge, Alberta
  • Type: Jackshaft
  • Heavy industrial duty: high cycles
  • Power: available in ½, ¾, 1, 1½, 2, 3 and 5 HP
  • With chain hoist
  • Single-Phase: 115V and 230V,
    3-Phase: 208V, 230V and 460V, 575V
 

MORE DETAILS

The GH model is a heavy industrial‑duty gear‑reduced hoist door opener, as manufactured by The Chamberlain Group and is for use on vertical or high lift sectional doors, rolling doors and grilles. It is rated for 25 cycles per hour constant high loading. In excess of 90 cycles/day.

  • Drive system: chain hoist
  • Voltage/phase:
    • Single-Phase: 115 V and 230 V
    • 3-Phase: 208 V, 230 V and 460 V, 575 V
  • Class 2 Circuit with 40 VA transformer
  • Horsepower: available in ½, ¾, 1, 1½, 2, 3 and 5 HP.
  • Minimum side room required: 20 in (508 mm)
  • Control circuit: Logic 4.0 Control Board (L4) available on 115V, 208/230V, 460V and 575V
  • Floor level chain hoist with electrical interlock for emergency manual door operation
  • High‑starting torque continuous‑duty motor with overload protection
  • Heavy‑duty worm gear‑in‑oil‑bath peed reducer
  • 3‑button control
  • Hoist wheel is easily moved to Right of Left hand side of unit eliminating the need to order left or right mounting
  • Solenoid brake, standard
  • 5V DC (L4) NEC Class 2 control circuit
  • C2 is a factory default setting; B2 easily field set using the Selector Dial (requires CPS-U, CPS-UN4 or CPS-EI)
  • Prewired to accept sensing devices (see Sensing Devices – Safety Accessories)
  • External radio control terminal
  • Fully adjustable linear‑driven limit mechanism
  • Motor removable without affecting limit settings
  • NEMA 1 type electrical enclosure
    • 50B40 door sprocket and #50 drive chain – standard on ½ thru 1 HP models
    • 50B60 door sprocket and #50 drive chain – standard on 1 ½ thru 2 HP models
    • 80B60 1 ¾” diameter with 3⁄8 keyway door sprocket and #80 drive chain – standard on 3 HP models
  • Baked‑on high‑durability black powder coat finish
  • Door speed approximately 8 to 9 inches (203 to 229 mm) per second
  • Approximate shipping weight – 125 lb (57 kg)
  • GH door operator Including a chain hoist
  • 3-button NEMA 1 station with MAS (02103L) (Maintenance Alert System)
  • Photoelectric sensors (CPS-U)
  • Chain spreader (4000000714)
  • Remote(s) optional
  • Also included: a bag including all necessary hardware for installation

 

Liftmaster - GT Model

Liftmaster GT Model - Residential Garage Door Openers - Lethbridge, Alberta
  • Type: Trolley
  • Industrial duty: more 20 cycles / hour
  • Power: available in ½, ¾ and 1 HP
  • Emergency manual operation using accessible disconnect
  • Single-Phase: 115V and 230V,
    3-Phase: 208V, 230V and 460V, 575V
 

MORE DETAILS

The GT model is a heavy industrial-duty trolley door opener, as manufactured by The Chamberlain Group and is for use on standard lift sectional doors. It is rated for 25 cycles per hour constant high loading. In excess of 90 cycles/day.

  • Trolley type door opener
  • Voltage/phase:
    • Single-Phase: 115 V and 230 V
    • 3-Phase: 208 V, 230 V and 460 V, 575 V
  • Horsepower: available in ½, ¾, 1 and 1 ½ HP
  • Additional headroom required: 4 in (102 mm)
  • Required depth: Door height + 48 in
  • Continuous‑duty high‑starting torque motor with instant reverse.
  • Thermal motor overload can be easily reset from the 3‑button floor level control station
  • Removable hinged electrical box cover.
  • Quiet‑gliding rail spacers.
  • Single‑or three‑phase, capacitor start on single‑phase.
  • Motor is removable without affecting limit switch settings.
  • All operators are factory preset to C2 wiring, providing momentary contact to open and stop, with constant contact to close. Monitored entrapment protection, using approved photo sensors CPS‑U are standard. All other wiring types, B2, T, TS and FSTS, can be selected with the selection of a switch. LiftMaster CPS‑UN4 and CPS‑RPEN4 photosensors or a monitored 4‑wire sensing edge (via a CPS‑EI Edge Interface Card) are optional. Logic 4.0 door openers can only accept UL‑approved LiftMaster CPS‑U, CPS‑UN4, CPS‑RPEN4 or CPS‑EI monitored entrapment protection devices.
  • 10:1 first stage using heavy‑duty gears running in oil bath; cast iron housing; #41 chain second stage; #41 chain on trolley.
  • Sealed roller bearing in gear reducer.
  • Heavy‑duty solenoid‑actuated brake.
  • Adjustable friction clutch helps protect against major damage to door and operator should the door meet an obstruction.
  • Spring‑loaded disconnect for emergency manual operation.
  • Motor overload protection.
  • High‑strength dual L‑rail track with exclusive nylon quiet‑gliding chain guides on rail spacers for quiet, smooth operation.
  • High‑strength dual L‑rail track with nylon quiet‑gliding chain guides on rail spacers for quiet, smooth operation.
  • 1.5 second delay‑on‑reverse circuit to prevent premature door and operator wear.
  • The Timer‑to‑Close automatically closes the door – programmable in 1‑second or 15‑second increments.
  • The mid‑stop stops the door at programmable mid‑stop during open travel.
  • The Maximum Run Timer signals the door to reverse or stop if closing time exceeds maximum by more than 10 seconds.
  • Maintenance alert system (5 000 to 10 000 cycles).
  • UL and CSA listed.
  • 2‑year warranty.
  • GT door operator
  • 3-button NEMA 1 station with MAS (02103L) (Maintenance Alert System)
  • Photoelectric sensors (CPS-U)
  • Also included:
  • Rail and chain according to door height
  • Hardware for installation
    Remote(s) optional

Liftmaster - MJ Model

Liftmaster MJ Model - Residential Garage Door Openers - Lethbridge, Alberta
  • Type: Jackshaft
  • Medium duty: less 12 cycles / hour
  • Power: ½ HP
  • Without chain hoist
  • Single-Phase: 115V
 

MORE DETAILS

The MJ model is a medium-duty door opener, as manufactured by The Chamberlain Group and is for use on vertical or high lift sectional doors or small rolling doors and grilles. It is rated for 12 cycles per hour during peak periods. Up to 50 cycles/day.

  • Single phase: 115 V
  • Horsepower: ½ HP
  • Minimum side room required: 18 in (457 mm)
  • Solid‑state medium‑duty logic circuit board.
  • High‑starting torque operator with instant reverse.
  • Capacitor start on single‑phase
  • NEMA 1 type electrical box, heavy‑duty 11‑gauge steel frame with baked‑on powder coat finish, all reduction sprockets drilled and pinned to shafts.
  • Motor is removable without affecting limit switch settings.
  • Heavy‑duty solenoid brake
  • First‑stage heavy‑duty 4L V-Belt; second and third stages #48 chain
  • Heavy‑duty oil‑filled bushings.
  • Adjustable friction clutch helps protect against damage to the door and opener should the door meet an obstruction
  • Provides emergency manual operation using an electrically interlocked floor level disconnect
  • Integrated timer‑to‑close (TTC) allows programming from 5 to 60 seconds in 5‑second increments. Allows for timed automatic door closure after the door reaches the full open position (Requires monitored safety devices, with CPS‑U, CPS‑UN4, or CPS‑EI)
  • Integrated 90‑second maximum run timer
  • UL and CSA listed
  • 2‑year warranty
  • NOT compatible with myQ
  • MJ door operator
  • 3‑button NEMA 1 station (02103)
  • Photoelectric sensors (CPS-U)
  • Chain spreader (4000000714)
  • Remote(s) optional
  • Hardware for installation included

Liftmaster - J Model

Liftmaster J Model - Residential Garage Door Openers - Lethbridge, Alberta
  • Type: Jackshaft
  • Heavy industrial duty: up to 80-90 cycles / day
  • Power: available in ½, ¾, and 1 HP
  • Without chain hoist
  • Single-Phase: 115V and 230V,
    3-Phase: 208V, 230V and 460V, 575V
 

MORE DETAILS

The J Model is an industrial-duty jackshaft door opener, as manufactured by The Chamberlain Group and is for use on vertical or high lift sectional doors, rolling doors and grilles. It is rated for 25 cycles per hour during peak periods. Up to 80-90 cycles/day.

  • Drive system: chain hoist
  • Voltage/phase:
    • Single-Phase: 115 V and 230 V
    • 3-Phase: 208 V, 230 V and 460 V, 575 V
  • Horse power: available in ½, ¾ and 1 HP
  • Minimum side room required: 20 in (508 mm)
  • All operators are factory preset to C2 wiring, providing momentary contact to open and stop, with constant contact to close. Monitored entrapment protection, using approved photo sensors CPS-U are standard. All other wiring types, B2, T, TS and FSTS, can be selected with the selection of a switch. LiftMaster CPS-UN4 and CPS-RPEN4 photo sensors or a monitored 4-wire sensing edge (via a CPS-EI Edge Interface Card) are optional. Logic 4.0 door openers can only accept UL-approved LiftMaster CPS-U, CPS-UN4, CPS-RPEN4 or CPS-EI monitored entrapment protection devices.
  • Continuous-duty high-starting hoist operator with instant reverse.
  • Removable hinged electrical box cover.
  • 24V NEC Class 2 Circuit with 40 VA transformer
  • Capacitor start on single-phase.
  • Motor is removable without affecting limit switch settings.
  • Universal mount frame design.
  • First-stage heavy-duty 5L V-Belt; second and third stages #48 chain; #50 drive chain.
  • Industrial ball bearings on 1 in (25.4 mm) output shaft; heavy-duty oil-filled iron bearings on reduction shafts.
  • Adjustable friction clutch helps protect against major damage to door and operator should the door meet an obstruction.
  • The maximum run timer signals the door to reverse or stop if closing time exceeds maximum by more than 10 seconds.
  • Provides emergency manual operations using an electrically interlocked floor level disconnect and chain hoist mechanism.
  • Motor overload protection.
  • NEMA 1 type electrical box, heavy-duty 11-gauge steel frame with durable powder coat finish, all reduction sprockets drilled and pinned to shafts.
  • 1.5 second delay-on-reverse circuit to prevent premature door and opener wear.
  • The Timer-to-Close automatically closes the door – programmable in 1-second or 15-second increments.
  • The mid-stop stops the door at programmable mid-stop during open travel.
  • Maintenance alert system (5 000 to 10 000 cycles)
  • UL and CSA listed.
  • 2-year warranty.
  • Factory installed heavy-duty electrical brake (On ¾ HP and 1 HP, optional on ½ HP)
  • J door operator
  • 3-button NEMA 1 station with MAS (02103L) (Maintenance
  • Alert System)
    Photoelectric sensors (CPS-U)
  • Chain spreader (4000000714)
  • Remote(s) optional
  • Hardware for installation included

Liftmaster - HCTDCUL Model

Liftmaster HCTDCU Model - Residential Garage Door Openers - Lethbridge, Alberta
  • Type: Trolley
  • Power: DC motor
  • Single phase, 120V and 230V
 

MORE DETAILS

The HCTDCUL model, as manufactured by LiftMaster, is the ultimate high-traffic door and gate opener for apartment houses and low-profile applications. It is meeting the challenge of today’s high cycle applications by providing the ultimate in durability, quiet operation and security.

  • Single phase: 120 V and 230 V
  • Horsepower: DC motor, 24DC, 500mA, continuous-duty motor
  • Minimum extra headroom required: 4 inches (102 mm)
  • Security system: Security+ 2.0, technology that utilizes a tri-band signal
  • Battery backup (7Ah): 2 batteries providing up to 112 cycles or up to 24 days.
  • Specifically engineered to meet the needs of apartment houses, condominiums and low-clearance installations, the model HCTDCUL delivers unsurpassed safety, dependability and quiet operation. In a class by itself, the HCTDCUL is a heavy-duty, high-traffic operator designed with many exclusive features, including a Security+® receiver, built-in electronic reversing device, heavy-duty track and keyed trolley assembly.
  • Trolley type door opener
  • Total length installed:
    • 8 ft rails: 121.5 inches
    • 10 ft rails: 145.5 inches
    • 12 ft rails: 169.5 inches
  • The HCTDCUL is designed for installation in even the tightest applications. At only 8 inches high, it’s up to 10 inches shorter than other overhead operators. In addition, it’s extremely quiet so as not to disturb tenants living directly above the garage. For added safety, the HCT includes a key release feature for instant access in case of power failure. And all components are fully enclosed to greatly reduce the risk of injury.
  • Advanced control board
  • Electronic reversing device
  • Built-in radio receiver
  • Noise isolators
  • Trolley assembly and key release
  • DC motor, C-mounted continuous cycle motor
  • Digital motor protection.
  • Travel time is adjusted by a precision mechanical device and electrical limit switch system.
  • Integrated loop detectors.
  • Board includes electronic power management with overcurrent shutdown and automatic recovery.
  • Instant reversing parking gate Leeson Motor.
  • Gear drive system lubricated in an oil bath.
  • C-mounted continuous cycle motor.
  • Smooth-gliding trolley
  • Heavy-duty rubber isolators help prevent noise and absorb vibration.
  • Adjustable timer can be set up to 180 seconds.
  • Homelink compatible.
  • UL and CSA listed.
  • 5-year warranty.
  • LiftMaster HCTDCUL door opener
  • Saftey photoelectric sensors (CPSUN4G)
  • On-board receiver
  • Rail according to door height (in separate packaging)
  • 2 backup batteries (29-NP712)
  • Remotes and wall station optional

Liftmaster - INSL24UL Model

Liftmaster INSL24UL Model - Residential Garage Door Openers - Lethbridge, Alberta
  • Type: Heavy-Duty Industrial Slide Gate Operator
  • Power: DC motor
  • Battery backup included
  • MyQ technology and WIFI
  • Single-Phase: 120V and 240V
    Triphase: 208/230/460VAC and 575VAC
 

MORE DETAILS

The LiftMaster® Heavy-Duty Industrial Slide Gate Operator builds on the brand’s legacy of reliability. Easy to install, retrofit, program, and troubleshoot, it delivers worry-free continuous-duty operation, even in extreme weather conditions. The operator consistently lives up to the tireless demands of manufacturing, transportation, municipality, utility, and warehouse environments. It also works as a complete system when paired with safety devices and offers full control over access points via myQ® technology.

  • Soft start/soft stop, motor 24V. DC., brushless.
  • Lockable steel cabinet, 14 ga. steel, weatherproof (NEMA 3R rated) cabinet prevents unauthorized access into the operator and protects it from the environment.
  • Optional riser (MRIN) makes it easy to replace an existing operator, providing multiple mounting positions and better protection from the climate.
  • Approved for gates up to 21.3 m (70 ft.) long and weighing up to 998 kg (2,200 lb.).
  • Battery backup included, gate always in operation, with 7AH, 55 cycles and 105 daysin length, and with 33AH, 170 cycles and 180 days in length.
  • 120/240VAC single phase, optional 3 phase kit for 208/230/460VAC and 575VAC.
  • Operation without heater -4°F (-20°C) to 140°F (60°C); with optional heater: -40°F (-40°C) to 140°F (60°C)
  • MyQ and internet compatible with the internet gateway 828LM.
  • Security+ 2.0® 3-channel receiver will handle up to 50 remote controls (unlimited remotes with 811LMX/813LMX).
  • Compliant with ANSI/CAN/UL325 standards
  • 5 years warranty
  • LiftMaster gate opener INSL24UL
  • Monitored entraptment protection devices, LMRRUL
  • 5 ft.Edge sensor kit model S505AL
  • 2 Batteries 12VDC 7AH (29-NP712)
    Also included:
  •  30 feet of chain #40 with chain master link
  • Remotes and others in option

We are Servicing Clients in:

Lethbridge, Coaldale, Diamond City, Coalhurst, Nobleford, Picture Butte, Raymond, Magrath, Fort Macleod, Taber, Cardston, Pincher Creek or beyond

Need A Free Estimate?

Call us at Superior Overhead Services. We are happy to serve you 24/7!

Call Us Now
Email Us
Scroll to Top